Model Tipo B Plate Processing

  • s
  • s

Model Tipo B

  • Side address material positioning system for reduced footprint and increased accuracy.
  • Rack and pinion positioning of material clamps maximizes the utilization of the material.
  • Side address clamps permit the processing of irregular shaped drops.
  • Handles plates up to 4"in thickness.

Model Tipo B

  • 110 ton of punchpower.
  • Up to 4 different punch tools available.
  • 4" diameter maximum hole size.
  • High performance spindles with a ball screw feed and fixed spindle design to fully utilize carbide tools for drilling rates up to 60 inches per minute.
  • Spindle speeds up to 4,000 RPM is provided with a 26 HP drive.
  • Oxy-fuel and plasma cutting systems.
  • Guaranteed accuracy with rack and pinion positioning and measuring systems on stock material regardless of the edge condition of the stock plate.
  • The datum line carriage system eliminates the potential of horizontal clamps collapsing the skeleton.
  • Irregular stock plates or drops can be returned to stock and later utilized without having to make a square cut to start the CNC process.
  • The datum carriage system permits virtually the entire stock length to be used to minimize scrap.
  • Guaranteed accuracy regardless of rust and mill scale.
  • Guaranteed accuracy on large and small parts
  • Maximum accuracy is assured regardless of where they are nested in the stock plate

Drill Spindles

  • The Ficep drill spindle design features a ball screw feed that is consistent with today's machining center designs.
  • This design permits the tool to advance through the material at a uniformfeed rate that is coordinated and maintained by the CNC control.
  • Eliminates the tendency for the drill bit to rapidly accelerate and actually punch through the material upon breakthrough.
  • This is the same system that is used in all CNC machining centers today to achieve maximum metal removal and to be able to fully utilize today's high performance insert tooling to its maximum efficiency.
  • The spindle speed range of the Ficep drilling spindle is also designed to accommodate the RPM (up to 3,000 RPM) requirement of today's high performance insert tools.
  • The entire drill head and spindle are advanced to the material as a single unit rather than just extending the spindle while the gearbox remains stationary to eliminate spindle wobble.
  • Internal and external coolant selected by program command.
  • Full spindle speed range available for all tools; maximum hole size of up to 4".
  • Punching is always located directly in the middle of the hydraulic punching ram to eliminate any sideloading positions.

CNC Control

  • Quick operator familiarity due to the utilization of a standard PC platform
  • The Ficep eliminates the requirement for additional hardware such as third party axis controlboards, PLC hardware and encoder switching boards
  • The Ficep Windows-based Control is provided with the proprietary Ficep for remote diagnostics through an internet connection.

Part Marking

  • 38 position fully programmable turret marking system
  • Fully programmable scribing system for part marking and the generation of scribing lines.
Specifications
Model Plate Size Positioning System Punches Drills
Tipo B 164 1,600 mm x 3,000 mm Side datum clamps Yes Optional
Tipo B 254 2540 mm x 6,000 mm Side datum clamps Yes Optional
Options
Model Plasma Oxy/Fuel Drill Thickness Punch Thickness Spindle
Tipo B 164 Standard Optional 100 mm 25 mm 25.4 kW
Tipo B 254 Standard Optional 100 mm 25 mm 25.4 kW


Related Products